Double Column Large Gantry Machining Center Moving Column YSMD-21042

YSMD-21042 Large Gantry Machining Center Features

• 

  ①. Dual Motor with Anti-Backlash Transmission Structure

  High Precision, Heavy Load, High Speed, Low Noise, Longer Service Life.

  ②. Gear Transmission

  High Precision, Heavy Load, High Speed, Low Noise, Longer Service Life.

  ③. Square Ram and Sliding Seat Structure

  Dimension:500x500, Heavy-Duty Design;

  Direct-Driven Design;

  Large-Size and Heavy-Duty design ensures that the ram is firmly connected;

  Three extended sliders at the top and four standard sliders at the bottom.

  ④. Vertical / Horizontal Automatic Tool Magazine

  ⑤. Italy BF Gear Box

  High-performance speed, low noise. It could expand the motor's constant power range. It is easy to install. The machine can be used in conjunction with multiple series of motors. It can adapt to high-strength tension and small size.

  ⑥. Extended Angle Milling Head

  ⑦. Automatic Hydraulic Angle Milling Head

  ⑧. Two-Way Spindle Angle Milling Head

The Moving Column Machining Center Advantages

1. Effectively avoid the problem of overshoot in response to moving workbench machine tools when the load weight is small, and the response is slow when the load weight is large, and completely avoid the changes in the drive, acceleration, accuracy, processing parameters, etc. of the machine tool due to the change of the workpiece weight. influences.

2. Since the worktable does not move, compared with the products with the movable worktable structure of the same specification, larger workpieces, and special-shaped workpieces can be placed on the worktable without worrying that the workpiece will interfere with other parts of the machine tool. In addition, high-precision machining can be smoothly achieved for parts with an incorrect center of gravity. It is very suitable for the processing of large, long-shaped workpieces.

3. The machining area and the moving area of ​​the machine tool are separated, and each moving part is far away from the cutting surface, and the quality of the moving parts of the tool only needs to be moved during processing, thus avoiding the influence of high inertia motion, thus ensuring the machining accuracy and quality of the workpiece. Motors, lead screws, rolling guides, and positioning switches are not easily affected by chips and cutting fluids and cause failures. The machine tool has the characteristics of fewer failures and easy maintenance.

4. Fix the indefinite worktable, so that the operator can load and unload the workpiece near the worktable, and the operation is more flexible and convenient.

5. The worktable is fixed and does not participate in the movement of the X and Y axes. Therefore, the floor space of the machine tool is greatly reduced and the utilization rate of the customer's workshop is improved.

Moving Column Series Parameters

Standard Accessories

Options