YSBD-130 series are equipped with high precision and high power horizontal boring and milling performance. The large worktable, greatly meets the machining applications of energy petroleum, shipbuilding, large structural parts, construction machinery, diesel engine body, etc. The enclosed box ram and the gearbox are one-piece castings with greatly improve the rigidity and stability of the Z and W axis, and enhance the cutting ability and precision.
Max. X-axis Travel :
2500mmMax. Y-axis Travel :
2000mmMax. Z-axis Travel :
1500mmMax Workpiece Length :
1400mmMax Workpieces Width :
1600mmMax Workpieces Weight :
8TApplication :
Auto PartsProcessing :
Surface Milling, Drilling Holes, TappingHorizontal Boring Machining Center Structure Characteristics
 |
1. Tool magazine structure 40 and 60 tools guideway-type tool magazines, which are driven by a servo tool magazine, improve the overall tool change efficiency. |
|
2. Spindle structure The main shaft installs European structure design, high rigidity, high speed, and low vibration. Low speed and high torque for the spindle. |
|
| 3. The worktable installs super-large grinding gears. It is combined with twin-turbo, vortex anti-backlash structure to ensure accuracy. | |
|
4. Transmission structure The X and Z-axis transmission method installs a direct-acting four-wheel drive. It has stable accuracy. Also, it could eliminate backlash, and improve torsional rigidity and allow angle. The Y-axis installs direct-drive transmission and cooperates with a German reducer to improve torsional rigidity. |
|
|
5. Counterweight structure Use servo frequency conversion hydraulic station, the counterweight of the hydraulic cylinder reduces the axial load and lengthen the life. |
|
|
6. Casting structure design The linear guideway installation surface and the ballscrew center are on the same plane, which makes the ballscrew drive more stable and ensures the stability of the overall accuracy of the machine tool. |
|
|
7. Hanging guideway structure The Y-axis adopts a box-in-box high-rigidity right and left paired lining structure. The Y-axis installs 4 linear guide guideways, 2 front and 2 back, with high rigidity, high precision, and long service life. |
Parameters
| Model | YSBD-130/8T | ||
| Subject | Specifications | Units | |
| Travel | X-Axis (Standard) | mm | 2500 |
| X-Axis (Optional) | mm | 2500/3000/3500/4000 | |
| Y-Axis (Standard) | mm | 2000 | |
| Y-Axis (Optional) | mm | / | |
| Z-Axis (Standard) | mm | 1500 | |
| Z-Axis (Optional) | mm | 2000 | |
| W-Axis (Standard) | mm | 550 | |
| Worktable | Worktable Size-Standard (L*W) | mm | 1400x1600/8T |
| Worktable Size-Option (L*W) | mm | / | |
| Table Indexing | deg | 0.001° | |
| T-Slot | mm | 28H7x 200x11 | |
| Spindle | Spindle Nose to Worktable | mm | 75~3275 |
| Spindle Nose to Table Center | mm | 65~2065 | |
| Spindle Diameter | mm | ∅110 | |
| Spindle Type | / | BT50 | |
| Spindle R.P.M. | rpm | 3500 | |
| Spindle Transmission | / | Belt | |
| Motor | Spindle Motor | kw | 18.5/22 |
| Maximum Torque | Nm | 973.5/1155 | |
| Accuracy | Indexing Accuracy | arc/sec | 10" |
| Indexing Repeatability | arc/sec | ±4" | |
| Position Accuracy | mm | 0.01 | |
| Repeatability | mm | 0.005 | |
| Drive Type | X/Y/Z-Axis | / | Direct |
| W-Axis | / | Belt | |
| Feedrate | X/Y/Z/W Cuttinq Feedrate | m/min | 10/10/10/6 |
| X/Y/Z/W Rapid Traverse | m/min | 10/10/10/8 | |
| Tool Changer | Rod Storage Capacity | / | 40 |
| Seleciton Method | / | Servo Drive | |
| Max. Tool Diameter | kg | 25 | |
| Max. Tool Weight | mm | 500 | |
| Max. Tool Length | mm | ∅125/∅250 | |
| Tool Change Time | sec | 14 | |
| Power Required | Air Pressure Requirement | kg/cm² | 6 |
| Power Requirement | kva | 65 | |
| Others | External Dmensions (L*W*H) | mm | 6800X600X5500 |
| Gross Weight | t | 34.5 | |
Standard Accessories
| ARM Type Tool Changer | Rigid Tapping | Dual LED Work Light | Spindle Nose Air Blow |
| Automatic Lubricating System | Heat Exchange for Electric Cabinet | LED 3 Color Warning Light | Leveling Bolts and Pads |
| Semi-Endosed Guard | Coolant Tank & Chip Tray | M30 Auto Off | Rotary Table |
Options
| Optical Linear Scale | Tool Breakage System | Oil Mist Collector | Workpiece & Tool Probe |
| CTS | Chip Conveyor System | Oil Skimmer | Auto Parts Probe Measuring System |
Tags :
Tel : +86-592-6682467
WhatsApp : +86-18359729483
Email : info@cncyangsen.com
Address : No. 586-590 Shanbian Rd. Dongfu Industrial Zone Haicang Dist, Xiamen, Fujian Province, China 361027
